Bebeconfort EvolveFix Plus i-Size
Rear-facing 40-105 cm/18 kg; belt booster 100-150 cm.

Pros / Cons
Pros
- Rear-facing use runs from birth to 105 cm or 18 kg, with a side-loading position that makes harnessing easier.
- From 100 cm the harness stores inside the seat and the child uses the three-point vehicle belt; ISOFIX then remains optional for stability.
Cons
- Harness mode requires both ISOFIX and the support leg, so check the anchors and that the floor has no unsuitable storage compartment.
- At 11.7 kg with a fixed rotating base, this is not a seat for frequent car swaps; also measure front-seat clearance.
Product Facts
- Weight
- 11.7 kg
- Max Weight
- 36 kg
- Height Range
- 40-150 cm
- Seat Use
- Infant, Toddler, Booster
- Install Method
- ISOFIX or vehicle seat belt
- Rotation
- Yes
- Product page
- Open product page
- Price/Buy
- Check Price at Amazon
Bebeconfort EvolveFix Plus i-Size makes sense when side-loading and one fixed seat matter more than portability. Its harness mode runs rear-facing from 40-105 cm, with an 18 kg ceiling; the infant insert supports the earliest fit. The shell rotates for loading, then must lock in an approved travel position. A forward-facing harness setting is available from 76 cm and 15 months, but the seat can remain rear-facing to its 105 cm limit.
Harness mode requires ISOFIX plus the support leg, so inspect the vehicle floor and measure front-seat clearance before buying. At 100-150 cm, store the internal harness and use the vehicle lap-and-shoulder belt; ISOFIX is then optional and the support leg is not used. The fixed 11.7 kg base suits one main car better than frequent swaps. Never place a rear-facing seat before an active frontal airbag.